Our easy facility planner makes it possible to lead through a technically correct and full solar plant design in only 3 minutes. With just a few entries, you have the technical design and
the selection of all needed components of a complete solar plant for your home or business. The plausibility of all entries is checked and you are informed, if there were any technical errors.
Plus, it will compare every solar thermal system from AKOTEC to make sure you have the best offer for your building!
PLEASE NOTE: Our easy planner is (for now) only available in german!
What kind of information can you extract from the software?
For example, the required pipe diameters are displayed. You can choose between different tube materials. Optionally, you can also specify the pipe dimension. This is helpful, if e.g. the
climbing strands were already installed
during the construction of the building and the solar system is added later. As a result of the pipe network calculation, the program selects the right pump from the stored pump
catalog. Line and expansion vessel are also dimensioned and calculated with corresponding setting pressures.
What information are the output at the end?
The results can be saved or printed. Thus, one can take the results also to the construction site, has the important plant data locally and can take a look at the planning throw. The
printout lists the important data for the installer,
such as the MAG to be set and the operating pressure. The necessary volume flow is also calculated on the basis of the collector field data.