full vacuum tube collector Weiser Power

The vacuum tube collectors Weiser Power differ from the system Heat Pipe in their construction and their each and own advantages. When you decide which system to choose, it is most important to look at what your building needs. You are welcome to use our solar calculator and easy-planner to answer these questions. Both systems guarantee a financial support and help to protect the environment. Get more information all around our full vacuum tube collectors Direct Flow. For open questions contact us via email or phone!

product advantages:

4 times higher efficiency than with solar modules for electricity generation
100% made in Germany
Permanent protection of the vacuum through patented glass-metal connection
Weather-resistant nano-coating prevents dirt pick-up
20-year manufacturer's guarantee
Tubes can be rotated through 360 ° and optimally aligned to the sun
Same tube spacing when connecting several collectors
Versatile installation options, flat roof, pitched roof, facade, balcony, elevation
Easy assembly without heavy tools due to plug connection
Plug-in tubes connected to distributors with quick change facility
The collectors are available in 213 RAL colors for a visually perfect adaptation to the roof and facade
Collectors are TÜV tested in accordance with DIN EN 12975-1: 2006-06, DE EN 12975-2: 2006-06, Solar Keymark register no .: 011-7S471R
Hailstorm tested according to: DIN EN 12975-2: 2006

collector model
Art.-No. 09000
- Weiser Power 200-5/80 Direct Flow with mirror and frame
- Vacuum tube collector with housing and distributor (silver anodized)
- 5 Direct Flow power tubes a 800mm (absorber coated on both sides)
- Power: approx. 215 W_p
- Gross area: 0,36 m²
- Absorber area: 0,38 m²
- Dimensions: 1000 x 375 mm
- Connections = quick connection
- Collector connection with pat. compensate
Plus:
- Angulated hose
- Collector connector with sensor sleeve
- carrying case

collector packages Weiser Power

Our collector packages Weiser Power can either be used for warm water preparation or heating support and warm water preparation. All models are very versatile in their montage and can either bet installed verticale or horizontal. We know hoe hard it can be to make the perfect decision and to put together the rigth solar plant for your needs. We want to lift that weight off your shoulders with our prepared collector packages and make a suitable and coordinated pre-selection. You can also use our easy-planner and solar calculator beforehand to help get a first overview about the possible solar plant for your building/home.

warm water
facade / flat roof df30
Art.-No. 18030
- 1 x collector Weiser Power 3000 (Direct Flow collector with 30 power tubes)
- 1 x set of end caps
- 1 x Fixing set hanger bolts (4 pcs)
- 1 x connection set angulated pipe (2 angulated pipes a 80 cm DN16, 1 connector with sensor sleeve)
- 1 x 20 kg heat transfer medium VT51

heating & warm water
facade / flat roof df50
Art.-No. 18050
- 1 x collector Weiser Power 3000 (Direct Flow collector with 30 power tubes)
- 1 x collector Weiser Power 2000 (Direct Flow collector with 20 power tubes)
- 1 x case connector set
- 1 x set of end caps
- 2 x Fixing set hanger bolts (4 pcs)
- 1 x connection set angulated pipe (2 angulated pipes a 80 cm DN16, 1 connector with sensor sleeve)
- 2 x 20 kg heat transfer medium VT51

heaging & warm water
facade / flat roof df60
Art.-No. 18060
- 2 x collector Weiser Power 3000 (Direct Flow collector with 30 power tubes)
- 1 x case connector set
- 1 x set of end caps
- 2 x Fixing set hanger bolts (4 pcs)
- 1 x connection set angulated pipe (2 angulated pipes a 80 cm DN16, 1 connector with sensor sleeve)
- 3 x 20 kg heat transfer medium VT51

vacuum tube collectors Weiser Power

We have 4 different variations of our Direct Flow systems, each of them have also different tube powers: with 5, 10, 20 and 30 tubes. All our vacuum tube collectors come with a double-side coated absorber, a case, assembler and a foot station. The connections are simple quick connections and the collector access has a patented compensator. The annual collector yield varies between 575 kWh and 2.688 kWh. You have further questions or are unsure? We have prepared a FAQ catalog with some important questions for you and we are happy to help personally!

Weiser Power 500
Art.-No. 19005
- Case, collector and stilt, anodized silver E6 / EV1
- 5 Direct Flow tube power (absorber coated on both sides)
- Annual collector yield: 575 kWh*
- Gross area: 0,81m²
- Absorber area: 0,815m²
- Aperture area with reflector: 0,73m²
- Aperture area without reflector: 0,51m²
- Dimension: 2170 x 375 mm
- Connections = quick connection
- Controll conenction with pat. compensator
* View the Solar Keymark certificate

Weiser Power 1000
Art.-No. 19010
- Case, collector and stilt, anodized silver E6 / EV1
- 10 Direct Flow tube power (absorber coated on both sides)
- Annual collector yield: 1.150 kWh*
- Gross area: 1,62m²
- Absorber area: 1,63m²
- Aperture area with reflector: 1,46m²
- Aperture area without reflector: 1,02m²
- Dimension: 2170 x 750mm
- Connections = quick connection
- Controll conenction with pat. compensator
* View the Solar Keymark certificate

Weiser Power 2000
Art.-No. 19020
- Case, collector and stilt, anodized silver E6 / EV1
- 20 Direct Flow tube power (absorber coated on both sides)
- Annual collector yield: 2.308 kWh*
- Gross area: 3,26m²
- Absorber area: 3,25m²
- Aperture area with reflector: 2,93m²
- Aperture area without reflector: 2,03m²
- Dimension: 2170 x 1500 mm
- Connections = quick connection
- Controll conenction with pat. compensator
* View the Solar Keymark certificate

Weiser Power 3000
Art.-No. 19030
- Case, collector and stilt, anodized silver E6 / EV1
- 30 Direct Flow tube power (absorber coated on both sides)
- Annual collector yield: 3.458 kWh*
- Gross area: 4,87m²
- Absorber area: 4,89m²
- Aperture area with reflector: 4,39m²
- Aperture area without reflector: 3,05m²
- Dimension: 2170 x 2250 mm
- Connections = quick connection
- Controll conenction with pat. compensator
* View the Solar Keymark certificate

collector field with Direct Flow tubes

Our collector fields with the Direct Flow tubes offer a selection from 40 to 70 tubes. These collectors come with a case, assembler and stilt as well. Our power tubes also have a double-side coated absorber. For an easy montage, we have quick connections everywhere. With our solar plants from AKOTEC and the collector fields, you can noticeably reduce energy costs and emission. In doing so, you provide direct added value for the environment. You have further questions? We are happy to guide you through.

collector field with
40 tubes
- 2 x 19020 or 2 x 19120
- Case, collector and stilt, anodized silver E6 / EV1
- 40 Direct Flow tubes power (absorber coated on both sides) or 40 Direct Flow standard tubes (absorber coated on one side)
- Annual collector yield: 4.616 kWh*
- Gross area: up to 6,52 m²
- Absorber area: up to 6,5 m²
- Aperture area: up to 5,86 m²
- Dimension: 2170 x 3000 mm
- Connections = quick connection
* View the Solar Keymark certificate

collector field with
50 tubes
- 1 x 19020 and 1x 19030 or
- Case, collector and stilt, anodized silver E6 / EV1
- 50 Direct Flow tubes power (absorber coated on both sides) or 50 Direct Flow standard tubes (absorber coated on one side)
- Annual collector yield: 5.766 kWh*
- Gross area: bis zu 8,13 m²
- Absorber area: bis zu 8,14 m²
- Aperture area: bis zu 7,32 m²
- Dimension: 2170 x 3750 mm
- Connections = quick connection
* View the Solar Keymark certificate

collector field with
60 tubes
- 2 x 19030
- Case, collector and stilt, anodized silver E6 / EV1
- 60 Direct Flow tubes power (absorber coated on both sides) or 60 Direct Flow standard tubes (absorber coated on one side)
- Annual collector yield: 6.916 kWh*
- Gross area: bis zu 9,74 m²
- Absorber area: bis zu 9,78 m²
- Aperture area: bis zu 8,78 m²
- Dimension: 2170 x 4500 mm
- Connections = quick connection
* View the Solar Keymark certificate

collector field with
70 tubes
- 1 x 19010 and 2 x 19030
- Case, collector and stilt, anodized silver E6 / EV1
- 70 Direct Flow tubes power (absorber coated on both sides) or 70 Direct Flow standard tubes (absorber coated on one side)
- Annual collector yield: 8.066 kWh*
- Gross area: bis zu 11,36 m²
- Absorber area: bis zu 11,41 m²
- Aperture area: bis zu 10,24 m²
- Dimension: 2170 x 5250 mm
- Connections = quick connection
* View the Solar Keymark certificate